濟寧安特工程機械有限公司
濟寧百利達進出口貿易有限公司
濟寧東方模具制造有限公司
濟寧風雅頌酒業有限公司
濟寧富陸通機械設備有限公司
濟寧富源機械有限公司
濟寧高新區藍冰絲杠銷售部
濟寧翰誠焊接技術有限公司
濟寧恒昌機械設備有限公司
濟寧恒嘉模板科技有限公司
濟寧弘豐畜牧機械有限公司
濟寧華勝食品有限公司
濟寧惠生機械有限公司
濟寧金鴿食品有限公司
濟寧金屬構造維修公司
濟寧錦泰焊接設備有限公司
濟寧駿興機械設備有限公司
濟寧力生數控設備有限公司
濟寧林海造紙機械設備有限公司
濟寧麥德麥食品有限公司德意小屋分公司
濟寧麥德麥食品有限公司環城西路分公司
濟寧潤澤輸送設備有限公司
濟寧市百佳樂食品有限公司
濟寧市大力工礦物資有限公司
濟寧市鼎誠工礦工程設備有限公司
濟寧市光屹機械設備有限公司
濟寧市嘉運機械設備有限公司
濟寧市茂松石化有限公司
濟寧市美勝機械設備有限公司
濟寧市品高食品有限公司
濟寧市任城區甘諾寶力食品店
濟寧市任城區禾味酥食品店
濟寧市任城區美天萊食品店
濟寧市任城區孟師傅早點鋪
濟寧市任城區米奇堡漢堡店
濟寧市任城區泉水茶莊
濟寧市任城區瑞紅電機維修部
濟寧市任城區陶班長的咖啡店
濟寧市任城區祥發標準件銷售中心
濟寧市任城區永心保健食品店
濟寧市任城區玉金居調味品店
濟寧市薩奧機械有限公司
濟寧市山一重工機械有限公司
濟寧市順源機械廠
濟寧市順源機械設備有限公司工程機械分公司
濟寧市順源機械設備有限公司礦山設備分公司
濟寧市騰翼工程機械有限公司
濟寧市鑫隆煤機廠
濟寧市兗州區恩賜食品商店
濟寧市兗州區海鮮源食品專柜
濟寧市兗州區賈正遠早點店
濟寧市兗州區淺啜茶葉銷售部
濟寧市兗州區潤泉凈水設備有限公司
濟寧市兗州區唐何水果店
濟寧市兗州區天天鮮水果店
濟寧市兗州區興隆莊鎮連柱農機維修部
濟寧市兗州區張玉法農機維修部
濟寧市兗州區正昊玻璃模具廠
濟寧市昱松工程機械有限公司
濟寧帥珍食品有限公司
濟寧騰宇工程機械設備有限公司
濟寧天順工程機械有限公司
濟寧沃爾華集團有限公司
濟寧鑫鵬數控設備有限公司
濟寧宇泰混凝土有限公司
濟寧宇越工礦機械設備有限公司
濟寧原生食品有限公司
濟寧運河緣食品有限公司汶上分公司
濟寧長信工程機械有限公司
濟寧中亞工程機械有限公司
濟寧眾力電機車制造有限公司
濟寧鑄美冶鑄材料設備有限公司
嘉祥縣愛雯食品店
嘉祥縣城區李春梅食品店
嘉祥縣城區劉保軍調味品店
嘉祥縣葛福瑞食品店
嘉祥縣杰達農機維修部
嘉祥縣金屯鎮芳雨食品商店
嘉祥縣梁寶寺鎮安祥模具廠
嘉祥縣隆力奇愛家食品店
嘉祥縣馬集鎮琳琳食品商店
嘉祥縣明富機械廠
嘉祥縣鑫博副食品店、
嘉祥縣秀麗食品店
金鄉縣高河街道大俊水果部
金鄉縣高河街道志法農機維修部
金鄉縣晗利食品有限公司
金鄉縣鴻通冷藏有限公司
金鄉縣金鄉街道匯湘茶葉店
金鄉縣金鄉街道老宋水果店
金鄉縣金鄉街道沐陽水果店
金鄉縣金鄉街道天合原冷庫
金鄉縣金興經濟園力口偉水果店
金鄉縣快易點食品科技有限公司
金鄉縣馬廟鎮超強面粉批發部
金鄉縣潤旺冷藏有限公司
金鄉縣羊山鎮茶緣茶葉銷售店
金鄉縣源泉石磨面粉有限公司
|
|
molbox RFM Gas Flow Calibrator Kits |
|
| 型 號：5141 |
| 品 牌：美國FLUKE |
| 技術指標：Maximum working measurement line pressure 600 kPa (87 psi) absolute |
 |
濟寧molbox RFM Gas Flow Calibrator Kits-5141-美國FLUKE
High end gas flow calibration made simple
Fluke Calibration 5141, 5142 and 5144 molbox RFM gas flow calibrator kits feature molbox RFM and molbloc-L configurations optimized to cover a very wide workload combined with molstic-L and other interconnect hardware needed for a complete calibration system. Simply supply 90 psi of pure N2 or air to the system. An included regulator delivers a stable regulated flow to the molbloc. Downstream of the molbloc, an included metering valve allows you to regulate the mass flow value required for the DUT. It’s that simple; supply 90 psi gas upstream, tare the reading, and adjust the fine metering valve to deliver the desired mass flow rate with an accuracy of ± 0.5 % of reading. Fluke Calibration gas flow calibrator kits eliminate complication, but don’t compromise molbox/molbloc best in class performance.
· Flow ranges cover from 1 sccm to 50 slm
· ± 0.5 % of reading total one-year accuracy
· Measures mass and volume flow with user settable reference pressure and temperature conditions
· Reference standard is upstream of the device under test, eliminating cross contamination and expensive damage to the flow elements
· Integrated gas flow regulation and adjustment hardware
· Expandable to over 5000 slm with additional molbloc flow elements and control hardware
· Includes traceable calibration for operation in N2 and Air, with corrections for other gases
· Gas supply and test adapters included for 1/4 in tube, 1/4 in NPT and 1/4 in BSP
· Includes advanced functions such as totalize, average, hi/lo, deviation, on-board purge, leak test and tare, available from the front control panel or by RS-232 and IEEE-488 remote interfaces
A new standard in high end gas flow calibration
Fluke Calibration revolutionized high end gas flow calibration with the introduction of molbox/ molbloc mass flow standards. molbox/molbloc systems have replaced large, inflexible, error prone volumetric piston provers and bell provers with a compact, easy to use, versatile digital standard. molbox/molbloc systems are the standard of choice for high end calibration labs and mass flow device manufacturers around the world. Improvements offered by molbox/molbloc include:
· True mass flow calibration and traceability— no corrections from volumetric to mass
· Real-time digital mass flow indication, loaded with features—easily automated
· No moving parts—uninterrupted gas flow measurement, no fluctuations from piston stroke
· Flexibility to be positioned upstream or downstream— can calibrate at many line pressures
· Modular components allows future upgrade and expansion
· Very wide range with small footprint—no flow straightening hardware required
Whether your requirement is manual calibration of a simple variable area flow meter (rotameter) or fully automated calibration of a mass flow controller (MFC), molbox/molbloc systems offer the ideal solution. A molbox RFM with one or more molbloc flow elements can cover a wide range of flow calibration devices with total one-year measurement uncertainty of ± 0.5 % of reading. If your needs change, molbloc flow elements can be added, with models covering flows from 1 sccm to over 5000 slm (175 scfm). If better measurement uncertainty is needed, the same flow elements can be used with molbox1+ to achieve accuracy as good as ± 0.125 % of reading.
|
Measurement specifications
|
|
Gas calibration included
|
Nitrogen (N2), Air
|
|
Maximum working measurement line pressure
|
600 kPa (87 psi) absolute
|
|
Measurement range
|
<1sccm to 50 slm, depending on model. Flow ranges depend on test gas. Ranged indicated for N2 and Air.
|
|
型號
|
描述
|
|
5141-100
|
molbox RFM, molbloc 5E1-L 10 to 100 sccm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 5E1-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5141-1K
|
molbox RFM, molbloc 5E2-L 100 to 1,000 sccm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 5E2-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5141-10K
|
molbox RFM, molbloc 5E3-L 1 to 10 slm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 5E3-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5141-50K
|
molbox RFM, molbloc 3E4-L 5 to 50 slm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 3E4-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5142-1K
|
molbox RFM-M, molbloc 5E2-L 10 to 1,000 sccm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 5E2-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5142-10K
|
molbox RFM-M, molbloc 5E3-L 0.1 to 10 slm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 5E3-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5142-50K
|
molbox RFM-M, molbloc 3E4-L 0.5 to 50 slm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 3E4-L laminar flow element
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
|
5144-50K
|
molbox RFM-M, molblocs 5E2-L and 3E4-L10 sccm to 50 slm
Included:
· molbox RFM (5141 kits) or molbox RFM-M (5142 and 5144 kits) reference flow monitor with quick connect molbloc pressure lines, molbloc communication cable, line cord and user manual
· molbloc 5E2-L and 3E4-L laminar flow elements
· molstic-L mounting system, with fine pressure regulator and an isolation valve and precise flow metering valve for each molbloc-L
· Tubing and adaptors to connect gas supply and device under test, including 1/4 in tube fitting, 1/4 in NPT female, 1/4 in NPT male, 1/8 in NPT male and 1/4 in BSP male
|
，，
|
